Hi,
I just recived my first chineese lasercutter 150W.
I have got rid of all the bubbles in the tube. But each time I turn on the water cooler there are more bubbles.
Im using destilled water.
How can I make the system bubble free ?
Bubbles in tube everytime I turn on watercooler
Moderator: baker
-
- Posts: 2
- Joined: Mon Sep 14, 2015 4:52 am
- BiVecyMisy
- Posts: 10
- Joined: Fri Oct 02, 2015 1:43 pm
Re: Bubbles in tube everytime I turn on watercooler
Personally I let my pump circulate the water for a few minutes before I start cutting and leave it running until the water has cooled to room temperature afterwards
-
- Posts: 15
- Joined: Mon Jun 20, 2016 5:34 pm
Re: Bubbles in tube everytime I turn on watercooler
check the level in the cooler when the pump is switched on,
-
- Posts: 8
- Joined: Wed Sep 23, 2015 4:07 am
Re: Bubbles in tube everytime I turn on watercooler
I have just water tank at this moment (not cooler) and serious water bubbles appears ONLY when outlet of laser water is NOT submerged i tank. after start water pump it's does not matter.
-
- Posts: 9
- Joined: Sat Sep 26, 2015 8:55 pm
Re: Bubbles in tube everytime I turn on watercooler
Not sure if it applies to the larger tube like that, but I had to turn my tube so the inlet and outlet face up, that way the pump forces the air out immediately.
Sent from my A3-A20FHD using Tapatalk
Sent from my A3-A20FHD using Tapatalk