Good Day everyone Chris here from Timmins On Canada
Just getting my new Thunder Laser Nova 35 configured and would like to know if someone can give me the correct settings for engraving both line art and or a photo on the back of an iphone 5
I did some line art with the cut function but I'm just wondering if I should be using scan for engraving on the phones.
Also can I please be added to the Tech support forum for Thunder Laser as I am a customer.
Hellow and question
Moderator: baker
-
- Posts: 84
- Joined: Fri Jun 05, 2015 8:18 am
Re: Hellow and question
OK,I will ask webmaster add to Thunderlaser group.
Here is a video we engraver on iphone5s
Here is a video we engraver on iphone5s
phpBB [media]
Re: Hellow and question
Great Video but doesn't tell me settings used
Scan / cut
power
speed
Scan / cut
power
speed
Re: Hellow and question
ok,now you can post in Thunder Laser Tech support sub-forum.
-
- Posts: 84
- Joined: Fri Jun 05, 2015 8:18 am
Re: Hellow and question
Because after long time finding accurate data has difficult.I can only give you a range.
Model:Mini60-60w
power:12%
speed:300mm/s
This setting is only for reference and the actual data is in accordance with the test.
We used Anodized Aluminum test setting because phone only be used once
http://www.thunderlaser.com/materials/a ... minum.html
Model:Mini60-60w
power:12%
speed:300mm/s
This setting is only for reference and the actual data is in accordance with the test.
We used Anodized Aluminum test setting because phone only be used once
http://www.thunderlaser.com/materials/a ... minum.html
-
- Posts: 84
- Joined: Fri Jun 05, 2015 8:18 am
Re: Hellow and question
Here is Thunder Laser Cutter Power/Speed Parameters for Different Materials it can helped you.
http://www.thunderlaser.com/laser-download