Why the laser of a laser engraving machine becomes weaker than before?
Posted: Sat Jul 30, 2016 10:39 am
There are some users may troubled by this question: the laser of a laser engraving machine is becoming weaker and weaker. Here I will share several ways to solve the problem.
1. Focus Lens for contamination: Clean focusing mirror.
2. Focus relief laser engraver machine equipment whether changes: re-adjust the focus.
3. light path is offset: careful adjustment of the optical path.
4. reflective lens is contaminated or damaged: Clean or replace the reflective lenses.
5. laser power is energized: Checking laser power supply circuit so that it is normal.
6. laser tube is damaged or aging: Replace the laser tube.
7. laser power supply is damaged: Replace the laser power.
8. Cooling water is circulating flow: clear cool water.
9. the cooling water temperature is normal or not: Replace the clean cooling water to the temperature to normal.
What I tell you about laser weak of laser engraving machine ? we have to know how the above problems to be fixed, and welcome to our online support with laser engraving machine.
1. Focus Lens for contamination: Clean focusing mirror.
2. Focus relief laser engraver machine equipment whether changes: re-adjust the focus.
3. light path is offset: careful adjustment of the optical path.
4. reflective lens is contaminated or damaged: Clean or replace the reflective lenses.
5. laser power is energized: Checking laser power supply circuit so that it is normal.
6. laser tube is damaged or aging: Replace the laser tube.
7. laser power supply is damaged: Replace the laser power.
8. Cooling water is circulating flow: clear cool water.
9. the cooling water temperature is normal or not: Replace the clean cooling water to the temperature to normal.
What I tell you about laser weak of laser engraving machine ? we have to know how the above problems to be fixed, and welcome to our online support with laser engraving machine.