leetro---Lasercut
Moderator: baker
leetro---Lasercut
1 System Installation
1.1 Contents of the Control System
The control System includes hardware (controller 1 piece MPC6585) & control software. All in the package include software CD.
No. File & list Function Dir Remark
1 LaserCut61 Laser Engraving &Cutting software installation file ..\ Including “Setup.exe” and other file necessary, if installation failed, file may missed or broken, please contact us for replace.
2 Driver USB Driver of the controller ..\
3 Doc Controller manual ..\ LaserCut61 Manual
4 Firmware Update program of the controller ..\
5 Readme Update Record ..\
1.2 Installation of the System
Run Setup.exe,dialog box appears as below:
Click “Setup”, default install path C:\LaserCut61”, click to change the path.
LaserCut53、LaserCut60 can be installed in the same PC.
2 Quick Guide
2.1 Main Interface of the Software
Run the software, main interface appears as below:
Functions can be shown after a short delay of the mouse on the button.
2.2 Import Data
The button that the cursor indicates is “Import”.
You can import files that the system supports.
2.3 Set Processing Parameter
Select processing mode in the pulldown menu.
Double click and enter the processing parameter setting interface. so on…… Download:
1.1 Contents of the Control System
The control System includes hardware (controller 1 piece MPC6585) & control software. All in the package include software CD.
No. File & list Function Dir Remark
1 LaserCut61 Laser Engraving &Cutting software installation file ..\ Including “Setup.exe” and other file necessary, if installation failed, file may missed or broken, please contact us for replace.
2 Driver USB Driver of the controller ..\
3 Doc Controller manual ..\ LaserCut61 Manual
4 Firmware Update program of the controller ..\
5 Readme Update Record ..\
1.2 Installation of the System
Run Setup.exe,dialog box appears as below:
Click “Setup”, default install path C:\LaserCut61”, click to change the path.
LaserCut53、LaserCut60 can be installed in the same PC.
2 Quick Guide
2.1 Main Interface of the Software
Run the software, main interface appears as below:
Functions can be shown after a short delay of the mouse on the button.
2.2 Import Data
The button that the cursor indicates is “Import”.
You can import files that the system supports.
2.3 Set Processing Parameter
Select processing mode in the pulldown menu.
Double click and enter the processing parameter setting interface. so on…… Download:
Re: leetro---Lasercut
need some help here
i need to know if my Power: percentage of processing power. The first one is the power corresponding to low speed, while the latter is the power corresponding to high speed; does this need to match the settings in lasercut6.1 in the program because sometime when i setup a job it will engrave then the next time i run it it will not i can see my amp meter moving but only at 1ma and sometimes its at 5ma any help would be great
i need to know if my Power: percentage of processing power. The first one is the power corresponding to low speed, while the latter is the power corresponding to high speed; does this need to match the settings in lasercut6.1 in the program because sometime when i setup a job it will engrave then the next time i run it it will not i can see my amp meter moving but only at 1ma and sometimes its at 5ma any help would be great
Re: leetro---Lasercut
Hello leetro,
I am a complete novice with Laser engraving. I have purchased a basic machine from China and would like to use software that will be compatible with Windows 8.
The current software that was in the package will only work on XP which is a pain really, is there software out there that will work ?
I am looking forward to chatting to others regarding my future projects.
Thanks...
I am a complete novice with Laser engraving. I have purchased a basic machine from China and would like to use software that will be compatible with Windows 8.
The current software that was in the package will only work on XP which is a pain really, is there software out there that will work ?
I am looking forward to chatting to others regarding my future projects.
Thanks...
Re: leetro---Lasercut
To fix this problem, upgrade to the latest firmware.
Re: leetro---Lasercut
Please ensure that your driver is 6.1 before updating the firmware, otherwise you work on windows8
Because of major,be at ease so.
Re: leetro---Lasercut
Hi we have a Chinese laser engraver with leetro mpc6525 is it possible to use laser cut 6.1 I tried but got a connection error in the status bar of the software
Re: leetro---Lasercut
I am sure I am not doing this right but...
I have a laser with the Leetro 6515 controller. I have managed to load to many programs (i think) onto the machine. I can no longer delete any programs nor, can I add more (I was using a flash drive to run the programs). I need to "reset" or do something to dump all the programs to get the machine operational again. Does anyone know how to do a reset?
Thanks,
Jeff
I have a laser with the Leetro 6515 controller. I have managed to load to many programs (i think) onto the machine. I can no longer delete any programs nor, can I add more (I was using a flash drive to run the programs). I need to "reset" or do something to dump all the programs to get the machine operational again. Does anyone know how to do a reset?
Thanks,
Jeff
I have a Leetro 6515 and have managed to load to many programs onto the machine. I am not able to delete files to clear up space and make the machine operational again. Is there a way to reset the memory and clear out all of the old programs?
Re: leetro---Lasercut
I have laser cut i had to put on a new PC (used) it is running on XP just like my last one. I have successfully installed the program but when i go to start it it will flash the program on the screen and then it goes away followed by a computer ding??????????????????????????
-
- Posts: 1
- Joined: Tue Jun 20, 2017 8:38 am
Re: leetro---Lasercut
Hi,
Im using a Chinese Laser cut machine with a Leetro MPC 6525A motherboard.
i was able to use it for a year and 5 months. then while I was cuttin a design, my machine suddenly stopped. as if it was stuck.
then I reset it and it's stuck on the startup message.
any solution or help would be much appreciated. since the dealer here in our country sells the motherboard for a very steep price.
thanks!
Im using a Chinese Laser cut machine with a Leetro MPC 6525A motherboard.
i was able to use it for a year and 5 months. then while I was cuttin a design, my machine suddenly stopped. as if it was stuck.
then I reset it and it's stuck on the startup message.
any solution or help would be much appreciated. since the dealer here in our country sells the motherboard for a very steep price.
thanks!
Re: leetro---Lasercut
I work for Coastal Optical Systems. We manufacture optics for high profile projects most of the time. We have many CNC machines that grind optics and also manufacture metal housings to contain them.
บาคาร่า
บาคาร่า