95% perfect and then Squiggly

[Iciontech]

I have a 5.5W Two trees and a creality rotary pro kit.

Every looks perfect except for 3 places where it seems to just started to oscillate. I'm engraving at 25mm/second so it is within guidelines.

Any idea what would cause it?

Image has 3 places. L AND 2 Es. Everything else seems perfect

[joshuag]

I have a 5.5W Two trees and a creality rotary pro kit.

Every looks perfect except for 3 places where it seems to just started to oscillate. I'm engraving at 25mm/second so it is within guidelines.

Any idea what would cause it?

Image has 3 places. L AND 2 Es. Everything else seems perfect

It seems like you're encountering oscillation issues during engraving, especially in three specific areas. Despite engraving within guidelines, this problem persists. Check material consistency, machine mechanics, and software settings. If issues persist, contact technical support. Also, consider the Monport laser for reliable engraving results. https://monportlaser.com/?sca_ref=5031521.ka374VZjm3

[sean1990]

I have a 5.5W Two trees and a creality rotary pro kit.

Every looks perfect except for 3 places where it seems to just started to oscillate. I'm engraving at 25mm/second so it is within guidelines.

Any idea what would cause it?

Image has 3 places. L AND 2 Es. Everything else seems perfect

Consider exploring Monport laser options available on https://monportlaser.com/?sca_ref=5031521.ka374VZjm3. Their lasers are known for their high quality, ease of use, and affordability. It could be worth checking out their product range to see if they offer a solution that meets your needs.