4" lens focus problem
Posted: Mon Mar 18, 2024 2:14 am
Hi,
I have a Omicron type (Vevor) 60W CO2 Laser and was having trouble cutting through 9mm ply with the stock lens.
I purchased a 4" lens but the thinnest line I can get in the ramp test is not thin enough and the bed has to lower some 20-25mm to get that.
The lens is installed with the side I can see myself in pointing at the laser. Even with the best focus I can get I cant cut much at all. Any help would be appreciated.
I have a Omicron type (Vevor) 60W CO2 Laser and was having trouble cutting through 9mm ply with the stock lens.
I purchased a 4" lens but the thinnest line I can get in the ramp test is not thin enough and the bed has to lower some 20-25mm to get that.
The lens is installed with the side I can see myself in pointing at the laser. Even with the best focus I can get I cant cut much at all. Any help would be appreciated.