If a Fiber Laser Engraver is not engraving an image in EZCAD2, consider these troubleshooting steps:
1. File Format: Ensure the image is in a compatible format like BMP, JPEG, or PNG.
2. Image Quality: Check image resolution; low-res images may not engrave well.
3. Layer Settings: Verify the correct layer settings for engraving, and that the layer is visible.
4. Power and Speed: Adjust laser power and speed settings for optimal engraving.
5. Focus: Ensure the proper focal distance between the laser and the material.
6. Calibration: Calibrate the machine for accurate positioning and alignment.
7. Software Compatibility: Confirm EZCAD2 version compatibility with your system.
8. Driver/Connection: Update drivers and ensure a stable connection between the PC and the engraver.
9. Material Compatibility: Ensure the material responds to laser engraving.
10. EZCAD2 Settings: Check software settings for any anomalies or misconfigurations.
If issues persist, consult the Laser Engraving[
https://www.heatsign.com/laser-engravin ... -problems/] Machine manual or contact customer support for further assistance.