Hi there,
Looking for some help with my redsail 60watt laser cutter.
I am using auto laser 2.2.5 software to create files.
Using it to cut 3mm timber veneer but having a problem with the cutting and burning lining up with the file I have created. I have set the origin to be in the top left corner when standing at the machine as I have read it is best to make the origin as close to the laser source otherwise the laser needs to work harder.
Finding that once the machine has completed the burning component of the file it is meant to go back to the origin and complete the cutting BUT these do not match the file we have created. It always ends up about 3-4mm off. Very frustrating.
Have tried moving the origin, which did nothing.
I have attached some photos to explain what I mean.
Any suggestions greatly appreciated.
Problem with accurate cutting Redsail 60 watt 500 x 700 bed
Moderator: baker
-
- Posts: 2
- Joined: Sun Oct 23, 2016 8:43 am
Re: Problem with accurate cutting Redsail 60 watt 500 x 700 bed
Did you use the relative position?And you can check above and beyond the work size?
Re: Problem with accurate cutting Redsail 60 watt 500 x 700 bed
hi
Maybe your control system is out of the question.
Maybe your control system is out of the question.
Re: Problem with accurate cutting Redsail 60 watt 500 x 700 bed
Hi,
You can check if the layer output or not
You can check if the layer output or not
Last edited by Edwardor on Mon Oct 24, 2016 3:11 am, edited 1 time in total.
-
- Posts: 6
- Joined: Sat Aug 08, 2015 10:29 pm
Re: Problem with accurate cutting Redsail 60 watt 500 x 700 bed
There may be a
The first: laser focus problem
The second: the platform is not smooth
Third: all layer to set up the output
The first: laser focus problem
The second: the platform is not smooth
Third: all layer to set up the output
[url=http://www.efronzac.com/biografy]Фильмография и биография Зака Эфрона[/url]
-
- Posts: 2
- Joined: Sun Oct 23, 2016 8:43 am
Re: Problem with accurate cutting Redsail 60 watt 500 x 700 bed
Hi All
thankyou for your time in replying to my question.
I am doing this as a hobby and only got my laser cutter a few months ago
Would it be possible to explain more in laymans terms.
Many thanks
Sav
thankyou for your time in replying to my question.
I am doing this as a hobby and only got my laser cutter a few months ago
Would it be possible to explain more in laymans terms.
Many thanks
Sav
-
- Posts: 9
- Joined: Sat Sep 26, 2015 8:55 pm
Re: Problem with accurate cutting Redsail 60 watt 500 x 700 bed
I think so.Your design have many layer different color,when you download the file to the machine,you not select all layer.You should check it.Edwardor wrote:You can check if the layer output or not