If you buy a Chinese machine,How to modify the language of the machine control panel

General knowledge about laser here.

Moderator: baker

Post Reply
User avatar
Sword
Posts: 21
Joined: Thu Aug 29, 2019 7:07 am

If you buy a Chinese machine,How to modify the language of the machine control panel

Post by Sword »

If your laser cutter’s LCD panel is in Chinese,it might cost you lots of time to set to English.Now Thunder laser will show you how to change Chinese to English just in a few seconds.
  • Step 1. click “Z/U” button
1.png
1.png (767.42 KiB) Viewed 4452 times
  • Step 2. select "语言设置"and then press “Enter” to confirm
2.png
2.png (803.74 KiB) Viewed 4452 times
  • Step 3. select "英文"and press “Enter” to confirm
3.png
3.png (970.95 KiB) Viewed 4452 times
Now it's in English
4.png
4.png (647.83 KiB) Viewed 4452 times

--I am not a technician,just a porter of knowledge. :D
I hope everyone can work happily every day. :D :D
Sonst1935
Posts: 1
Joined: Wed May 06, 2020 8:14 am

Re: If you buy a Chinese machine,How to modify the language of the machine control panel

Post by Sonst1935 »

I believe that there must be a language reset button on the machine as these types of machines generally have that. I have read about this on grabmyessay which is why I can tell you that there will be a button on this machine. There should also be a multi-language booklet with the machine on which everything would be specified.
Post Reply