NEJE master engraver 7 and 20w.

Discuss laser machine here freely.

Moderator: baker

Post Reply
Mark101
Posts: 6
Joined: Thu Dec 05, 2019 9:47 pm

NEJE master engraver 7 and 20w.

Post by Mark101 » Wed Jan 15, 2020 11:58 am

Good day to all and a belated HAPPY NEW YEAR.

We have a NEJE master engraver with 7w and 20w modules.

Cutting area is reasonable small at 150mm x 150mm.

I would like to make it bigger, does anyone know where I could but bigger X Y rails??

Cheers

Mark.

RKNAPPETT
Posts: 1
Joined: Wed Jan 15, 2020 2:16 pm

Re: NEJE master engraver 7 and 20w.

Post by RKNAPPETT » Wed Jan 15, 2020 3:09 pm

How are you getting on with neje master software?
I have a 7w kkmoon laser an I can’t get it to cut an engrave with Inkscape . I’ve tried other software but it will not connect . I am hoping you may have a solution.

Many thanks

Mark101
Posts: 6
Joined: Thu Dec 05, 2019 9:47 pm

Re: NEJE master engraver 7 and 20w.

Post by Mark101 » Fri Feb 28, 2020 5:50 pm

Hi.
I can't get in with inkscape either.
I use LibreCAD for the designing bit and the NEJE software to print.
I'm not sure if that helps in any way but I thought I'd pass it on to you.

FREEDDAWG
Posts: 4
Joined: Wed Apr 29, 2020 8:25 am

Re: NEJE master engraver 7 and 20w.

Post by FREEDDAWG » Wed Apr 29, 2020 9:24 am

You can lay the tiles with engraving on the floor, it will be a wonderful element of home decor, the tile consists of natural stone with engraving. A wide selection of engraved tiles can be found here https://polarengraving.com/. If you want an engraved array or panel, also known as a mosaic display, which can consist of your own drawing and inscriptions in any language, engraved on several bricks or tiles. When manufacturing tiles using exclusive technology using a combination of old and new methods, using sandblasting and laser technology, our engraving is preserved for life.

segal
Posts: 2
Joined: Tue May 12, 2020 9:59 am

Re: NEJE master engraver 7 and 20w.

Post by segal » Tue May 12, 2020 10:09 am

ortur laser 7w machine(neje ortur is almost the same )
does not turn on .The red LED is lit but does nothing else.
What could be the problem?

Post Reply