Search found 16 matches
- Thu Mar 03, 2016 12:05 pm
- Forum: General Laser machine discussion
- Topic: How to engrave methacrylate?
- Replies: 1
- Views: 2534
How to engrave methacrylate?
Hi. I'm trying to engrave methacrylate but can not get good results. Surely I will be doing something wrong. The transparent surface around the engraved area becomes opaque and not know why. I have seen engraved on the Internet with a very good finish , but do not know if it is given a final polish ...
- Tue Jan 26, 2016 11:45 am
- Forum: General Laser machine discussion
- Topic: Laser power decreases after some minute
- Replies: 2
- Views: 4550
Re: Laser power decreases after some minute
Have you a chiller?
Keep the temperature is very important.
Around 18 degrees
Keep the temperature is very important.
Around 18 degrees
- Thu Jan 21, 2016 8:45 pm
- Forum: General Laser machine discussion
- Topic: Need helps with cutting wood
- Replies: 6
- Views: 17450
Re: Need helps with cutting wood
Hi, Jessieea First, your 50w can cut 6 mm plywood without problem. But you should consider next : -Your tube co2 could be widely used. - the distance between plywood nozzle must be correct. In my machine is 6 mm. - the temperature of the cooling water should be low, close to 18 degrees. If you haven...
- Mon Jan 11, 2016 7:19 am
- Forum: Laser cut designs
- Topic: Making a dinosaur Ceratopsier
- Replies: 6
- Views: 6748
Re: Making a dinosaur Ceratopsier
Hi, Gerard.
As soon as possible I share dxf file.
It's made for plywood 5 mm. If you use other thickness, you must scale the dxf
As soon as possible I share dxf file.
It's made for plywood 5 mm. If you use other thickness, you must scale the dxf
- Sun Jan 10, 2016 11:05 pm
- Forum: Laser cut designs
- Topic: Makings a box with a engraved butterfly
- Replies: 1
- Views: 11425
Makings a box with a engraved butterfly
Hi.
Other work of engraving and cut
Plywood 5mm,
Regards
Other work of engraving and cut
Plywood 5mm,
Regards
- Sun Jan 10, 2016 11:01 pm
- Forum: Laser cut designs
- Topic: Making a dinosaur Ceratopsier
- Replies: 6
- Views: 6748
Making a dinosaur Ceratopsier
Hi.
These holidays I have made a dinosaur.
This is the result of the work.
I hope that like you.
Regards
Antonio
These holidays I have made a dinosaur.
This is the result of the work.
I hope that like you.
Regards
Antonio
- Mon Nov 16, 2015 7:57 pm
- Forum: Laser cut designs
- Topic: Laser cutting Eiffel Tower
- Replies: 13
- Views: 28216
Re: Laser cutting Eiffel Tower
Thank you, Nolan and Linus.
I´ll try as you tell me.
I´ll try as you tell me.
- Fri Nov 13, 2015 2:55 pm
- Forum: Laser cut designs
- Topic: Laser cutting Eiffel Tower
- Replies: 13
- Views: 28216
Re: Laser cutting Eiffel Tower
Hi, Nolan. This work will be my next project.. I have some questions about it. How cut you the inner Windows before the external edge? I can see that all is in black color, and I use a color to I want cut first and other color to external cut. I'll write again when I see the attached file. Regards A...
- Fri Nov 06, 2015 3:56 pm
- Forum: General Laser machine discussion
- Topic: energy laser
- Replies: 3
- Views: 4283
Re: energy laser
i have chinese machine 90*120 it cutting ok but every thing when i do energy it give me this message " no enough extend space please Esc " Similar Threads: Laser cutter energy factor for a given material Sustainable Energy Without The Hot Air Nuke Energy Steorn's E-Orbo "OU" Ene...
- Thu Oct 29, 2015 6:46 pm
- Forum: Laser cut designs
- Topic: Laser cutter a functional model
- Replies: 7
- Views: 6659
Re: Laser cutter a functional model
Hi.monday wrote:This is a functional model ....
Could you put a picture where we can see all the clock?
and other cuestion: How we give tension to the clock? rubber?, spring?
Regards
Antonio