CypCut Laser Cutting Control System
Posted: Fri Aug 28, 2015 3:17 am
Thank you for using CypCut laser cutting control system.
CypCut laser cutting control system (CypCut for short) is a set of system software designed for
plane laser cutting, including laser cutting process, common layout function and laser processing
control, most of its functions are applied in graphics processing, parameter settings, custom cutting
process editing, layout, path layer planning, simulation and cutting process control.
CypCut software can realize process control only if used with Dog and Control Card.
CypCut will enter DEMO mode while running on a computer without Dog, so that you can get
all other functions except process control for normal use. Therefore, CypCut can be installed in a
separate notebook for the design before processing.
Please note that this User Manual is only for instructions of main program about CypCut
software.
Please refer to other Manuals or contact us for the details of other tools installed with CypCut
software, such as platform configuration tool.
The Document is drawn up based on Version 6.3.486 of CypCut. As product functions are being
updated, there may be some differences between your product and the Manual. We will apologize for
such inconvenience.
Please feel free to contact us with any questions or suggestions you may have.
Download:
CypCut laser cutting control system (CypCut for short) is a set of system software designed for
plane laser cutting, including laser cutting process, common layout function and laser processing
control, most of its functions are applied in graphics processing, parameter settings, custom cutting
process editing, layout, path layer planning, simulation and cutting process control.
CypCut software can realize process control only if used with Dog and Control Card.
CypCut will enter DEMO mode while running on a computer without Dog, so that you can get
all other functions except process control for normal use. Therefore, CypCut can be installed in a
separate notebook for the design before processing.
Please note that this User Manual is only for instructions of main program about CypCut
software.
Please refer to other Manuals or contact us for the details of other tools installed with CypCut
software, such as platform configuration tool.
The Document is drawn up based on Version 6.3.486 of CypCut. As product functions are being
updated, there may be some differences between your product and the Manual. We will apologize for
such inconvenience.
Please feel free to contact us with any questions or suggestions you may have.
Download: