Rotary attachment
Posted: Fri Apr 21, 2017 4:54 pm
Hi,
I have a 100w chinese laser engraver and when i connect the rotary the "Y" axis does not move and the red light activates on the stepper driver. I have two different rotary attachments, regular and irregular. This happens with both.
Any ideas what might be causing this problem.
Thanks,
Shawn
I have a 100w chinese laser engraver and when i connect the rotary the "Y" axis does not move and the red light activates on the stepper driver. I have two different rotary attachments, regular and irregular. This happens with both.
Any ideas what might be causing this problem.
Thanks,
Shawn