Help! Kkmoon 3000mw NO SOFTWARE IN BOX!!
Moderator: baker
Help! Kkmoon 3000mw NO SOFTWARE IN BOX!!
Hello, I am a penturner and use a engraver for my pens. My first engraver died and the second one (purchased from ebay) arrived without the USB drive that has all the software.
The seller keeps telling me to reread the instructions and try again. The instructions say insert the USB drive. I contact the seller and the whole thing starts over again. My head hurts.
Does anyone have the software to run this machine? Kkmoon 3000mw 8cm x 8cm engrave area. The laser moves on axis, there is no bed.
There is a beautiful hand crafted wooden pen with your name on it if you can.
The seller keeps telling me to reread the instructions and try again. The instructions say insert the USB drive. I contact the seller and the whole thing starts over again. My head hurts.
Does anyone have the software to run this machine? Kkmoon 3000mw 8cm x 8cm engrave area. The laser moves on axis, there is no bed.
There is a beautiful hand crafted wooden pen with your name on it if you can.
Re: Help! Kkmoon 3000mw NO SOFTWARE IN BOX!!
If you put the usb stick into you PC, are there any files on it?
-
- Posts: 1
- Joined: Sun Jan 06, 2019 4:23 pm
Re: Help! Kkmoon 3000mw NO SOFTWARE IN BOX!!
HI,
I have the same problem. NO usb Key, NO software...
Would someone have the software for KKMOON 3000 for PC and MAC ????
I have the same problem. NO usb Key, NO software...
Would someone have the software for KKMOON 3000 for PC and MAC ????
Re: Help! Kkmoon 3000mw NO SOFTWARE IN BOX!!
Have you found the software yet? If not I have it.
Re: Help! Kkmoon 3000mw NO SOFTWARE IN BOX!!
i have it on my googledrive
-
- Posts: 1
- Joined: Tue Feb 26, 2019 5:11 pm
-
- Posts: 1
- Joined: Sat Oct 19, 2019 8:27 am
Re: Help! Kkmoon 3000mw NO SOFTWARE IN BOX!!
Actually I appreciate your work painter's life is not so easy he has to face so many problems. Actually, brother's business is a stationery shop he also has a hp printer work review article. Once I was reading this aricle I got a lot of knowledge about it. Your work so hard I appreciate again.
-
- Posts: 1
- Joined: Fri Jan 17, 2020 11:13 pm
Re: Help! Kkmoon 3000mw NO SOFTWARE IN BOX!!
I just purchased my 1st Laser Engraver, KKMoon Laser Engraver, but did not receive the operating software with the Engraver. I have checked with the Mfg but have not received a response. Any suggestions on how to obtain the operating software for the Engraver? Any guidance or assistance would be greatly appreciated.
-
- Posts: 1
- Joined: Thu Dec 10, 2020 3:14 pm
Re: Help! Kkmoon 3000mw NO SOFTWARE IN BOX!!
Hi....I bought the Kkmoon 3000mw laser etcher to supplant another etcher that kicked the bucket. It has 80x80mm etching zone, feeble light situating, the laser moves not the bed. The new etcher showed up from ebay and didn't have the USB drive with all the product expected to work it.
Lets simply state the merchant has been not exactly accommodating and leave it at that.
I am 2/3 completed a 60 pen work and the courteous fellow needs to give the pens to his representatives for Christmas.
Well I have the last 20 turned and holding up etching, but....
I am trusting that somebody has a similar etcher and can send me a duplicate of the product and drivers
pcb assembly quote
Lets simply state the merchant has been not exactly accommodating and leave it at that.
I am 2/3 completed a 60 pen work and the courteous fellow needs to give the pens to his representatives for Christmas.
Well I have the last 20 turned and holding up etching, but....
I am trusting that somebody has a similar etcher and can send me a duplicate of the product and drivers
pcb assembly quote