How to install the CorelDraw plugin for RDWorks

General knowledge about laser here.

Moderator: baker

Post Reply
User avatar
Sword
Posts: 21
Joined: Thu Aug 29, 2019 7:07 am

How to install the CorelDraw plugin for RDWorks

Post by Sword »

  • Firstly run CorelDraw and set the parameter following below instructions:
one-1014x1024.png
one-1014x1024.png (88.12 KiB) Viewed 5098 times
  • After that, close CorelDraw. Double click to open RDWorks installation program. Choose the type of CorelDraw_Laser (be sure the RDWorks main program has been already installed), and then tick the item RDworks, as shown below:
two.png
two.png (45.88 KiB) Viewed 5098 times
  • Click “install” and wait to compete the installation.
  • Again run CorelDraw. Choose and enter “Run Macro”(Tools > Marcos>Run Macro). Choose Marcos in: [Globalmacros (RDWorks15/16/17V8.gms)] > [RDWorksV8.UserInit]. Click run.
2 (2).png
2 (2).png (50.47 KiB) Viewed 5098 times
  • There will appear two extra buttons.
    3 (1).png
    3 (1).png (766 Bytes) Viewed 5098 times
    Move them to anywhere you want them to be. After finish drawing the graphics, click “Laser running” to directly import the graphics into RDworks.

--I am not a technician,just a porter of knowledge.
I hope everyone can work happily every day. :D :D
shreya31
Posts: 1
Joined: Sat Sep 21, 2019 6:23 am

Re: How to install the CorelDraw plugin for RDWorks

Post by shreya31 »

Excellent thread..!!!
Vicky5612
Posts: 1
Joined: Tue Nov 26, 2019 5:44 am

Re: How to install the CorelDraw plugin for RDWorks

Post by Vicky5612 »

Post Reply