Clearpath Servo motors for CO2 Laser cutter

Discuss laser machine here freely.

Moderator: baker

Post Reply
nick_the_builder
Posts: 1
Joined: Mon Jan 11, 2021 2:40 pm

Clearpath Servo motors for CO2 Laser cutter

Post by nick_the_builder »

Hello to everyone here,

My name is Nick.
I started to design a 60W laser cutter and I have a question about the motors.
Yesterday I found the Teknic company that they have the Clearpath Servo motors.

I found it very interesting and also I saw a video from a guy that they use them in his laser cutter.
Here is the video:
https://www.youtube.com/watch?v=BtrgYuD ... e=emb_logo

I checked their website, they have a lot of models but I'm not sure which one will be fine for my machine.
My design will be wih linear guide rails Hiwin HGH 15 for both X and Y axis, AWC708c or Ruida DSP controller and I will use it for vector and high speed raster engraving.
I'm thinking about this model
https://www.teknic.com/model-info/CPM-S ... tage=75VDC

but I'm not sure if the torque is good enough for high speed raster engraving.
Did someone have experience with them?

Thank you very much in advance!
Nick
Post Reply