Laser Engraver Forum

Yes, I think this is a good forum, but there are a lot of junk articles on the forum, but it is still a forum worth visiting. I also recently posted some posts that are helpful to people in this forum.

I will go to see your website, and I believe I can learn something.

Come on, come on.

If your laser cutter’s LCD panel is in Chinese,it might cost you lots of time to set to English.Now Thunder laser will show you how to change Chinese to English just in a few seconds. Step 1. click “Z/U” button 1.png Step 2. select "语言设置"and then press “Enter” to confirm 2.png Step 3. sel...

If the software shows the below information: 1.jpg Please try the following solutions: A.Please check if the USB cable is loose or not. 2.jpg B.Please check if the USB is connected to the PC interface on the machine correctly 3.jpg C.Try connect to another USB interface on the computer 4.jpg D.Chan...

Hello, I should learn to start using this program. There are some techniques or directions for using them. Or how to learn to do things To be useful for me to develop farther More than this, slot I want to learn because I look online. Or on YouTube It does not sound like it sounds. How much do you ...

Dear friends! I also have a laser cutting machine. I also faced the same situation at the beginning, and I also hope that I can quickly learn how to use and make a good work. Later I found a laser cutting machine website on the Internet. The name Thunder laser, I went to browse their website and fou...

If this problem occurs, generally the pulse setting of the X/Y axis motors is wrong. Please follow the below steps to solve the problem Please draw a 100x100mm square using the cut mode and send to your laser cutter and cut the square. https://www.thunderlaser.com/upload/troubleshooting/laser-cutte...

https://www.thunderlaser.com/wp-content/uploads/2018/11/08.jpg This problem is due to the different movement of the belt on both sides of the Y-axis, which lead the belt is not synchronized. 1. The coupling loose 2. The gear of transmission shaft loose 1. The coupling loose; Please check if one of ...

There are three possibilities A. Wrong pulse setting If your laser cutter has a wrong pulse setting, the laser head might keep moving even it reaches the edge and hits the boundary. If that is the problem, you need to reset the pulse parameter to fix it. Please refer to the following link to reset ...