Hi Dan,
Sorry to hear that your machine is not working well.
For your problem,please help to check with me.
The x axis does not work,will it reset when turn on,or the x axis does not reset normally,i mean it will hit the origin then you cannot move x axis by arrow key on LCD panel.
Search found 137 matches
- Thu Aug 16, 2018 1:23 am
- Forum: Thunder Laser Tech support
- Topic: X Axis does not work
- Replies: 7
- Views: 23226
- Fri Aug 03, 2018 6:01 am
- Forum: Thunder Laser Tech support
- Topic: Honeycomb materials and cleaning
- Replies: 2
- Views: 15222
Re: Honeycomb materials and cleaning
Hello, To answer your quesitons: 1.For the honeycomb table,it made from galvanized iron and yes the edges of honeycomb table made from aluminum. 2.To clean the plywood and acrylic residue,we generally use vacuum clean to remove them. you can refer to below link. http://support.epiloglaser.com/articl...
- Wed Aug 01, 2018 8:52 am
- Forum: Thunder Laser Tech support
- Topic: Rotary Attachment does not rotate - urgent !
- Replies: 2
- Views: 30252
Re: Rotary Attachment does not rotate - urgent !
Hello Anda, Sorry for your problem. For the connection,see below. connection for rotary attachment.png Please check it first. Then connect the rotary with the machine,turn on the switch,please check if the power light is on on the rotary,see below. connection for the machine.jpg power light.png How ...
- Wed Jul 25, 2018 8:06 am
- Forum: Thunder Laser Tech support
- Topic: Replacement of 100w laser tube with 80w?
- Replies: 1
- Views: 14510
Re: Replacement of 100w laser tube with 80w?
Hi Jim, It's ok if you want to replace the 100watt with an 80watt laser tube. They use the same power supply,you can keep the original power supply,no need to make any adjustment for power supply. Thunder laser machine have limited the max power as 70%,it's about 21~22mA on the meter for 80 and 100w...
- Thu Jul 12, 2018 3:39 pm
- Forum: Thunder Laser Tech support
- Topic: Test of 100w tube for power loss
- Replies: 3
- Views: 16676
Re: Test of 100w tube for power loss
Hi Jame, OK. The new 100watt laser tube can cut 6mm acrylic at speed 18 and power 70%. I will ask my colleague to reply on skype for your need tomorrow,ok? For your last question,are you mention the reflective mirror,it's molybdenum mirrors.The molybdenum mirrors have a high reflectivity, moreover, ...
- Thu Jul 12, 2018 2:53 am
- Forum: Thunder Laser Tech support
- Topic: Test of 100w tube for power loss
- Replies: 3
- Views: 16676
Re: Test of 100w tube for power loss
Hi James, This is Ben from Thunder laser. Sorry to hear that your laser tube is not working well now. Whenever there is a perceived loss of power, it could be caused by dirty or damaged optics, bad laser beam alignment or a focus or table level issue. Below you can find a document to instructions on...
- Mon Jun 25, 2018 6:11 am
- Forum: Thunder Laser Tech support
- Topic: Laser Tube Replacement
- Replies: 1
- Views: 14260
Re: Laser Tube Replacement
Hi Steven,
You can replace with a RECI W4 100 watt tube for your machine.
But we don't use the RECI laser tube now,you should buy one by yourself.
You can replace with a RECI W4 100 watt tube for your machine.
But we don't use the RECI laser tube now,you should buy one by yourself.
- Mon Jun 25, 2018 6:05 am
- Forum: Thunder Laser Tech support
- Topic: standard laser head vs HR head
- Replies: 1
- Views: 14785
Re: standard laser head vs HR head
Hi Anda,
I wonder if you use HR head to cut material.
Please noted,the HR head is generally used only for engraving,if you want to cut,you can only cut something very thin,like paper.
I wonder if you use HR head to cut material.
Please noted,the HR head is generally used only for engraving,if you want to cut,you can only cut something very thin,like paper.
- Thu Jun 21, 2018 2:02 am
- Forum: General Laser machine discussion
- Topic: Control Mars 130 via network cable & switch
- Replies: 3
- Views: 1656
Re: Control Mars 130 via network cable & switch
Hi Robbie,
To control machine via a wireless router,please see below.
To control machine via a wireless router,please see below.
- Thu Jun 21, 2018 1:50 am
- Forum: Thunder Laser Tech support
- Topic: Loss of Power!!!!
- Replies: 3
- Views: 18673
Re: Loss of Power!!!!
Hi Steven, Do you check the Beam pattern for the laser tube? Please let me know if the laser tube outputs a circle(laser beam) but not a solid round which is bad? It's ok if you want replace with another brand of laser tube,but if it's co2 glass laser tube, its life is almost the same, it is about 2...