Laser Engraver Forum

Today we are introducing a 523.5nm green diode pumped solid-state laser. A 523.5nm DPSS laser is a laser that emits light at a wavelength of 523.5nm. It is a green laser that is used in a wide range of applications such as laboratory and industrial applications. The power output of this laser adjust...

This time we bring a 915nm high power semiconductor laser. The bottom of the laser module is equipped with a heat sink. Aluminum heat sink and cooling fan can effectively prolong the continuous working time of high-power lasers. There are three working modes of CW/TTL/Analog on the power supply for ...

This is 520nm high power green fiber laser system. This laser adds software control. Use RS232-USB to connect the laser and computer software.The laser output power can be adjusted by software. Using EasyHost software, you can also write your own programs to control the lower computer according to t...

Today we are talking about software-controlled laser source. It is 450nm Blue fiber coupled laser source controlled by software. EasyHost is the control software. The connection between the laser and PC software adopts the communication protocol of RS232. The laser supports two working modes: CW/Mod...

A diode-pumped solid-state laser (DPSSL) is a solid-state laser made by pumping a solid gain medium, for example, a ruby or a neodymium-doped YAG crystal, with a laser diode. DPSSLs have advantages in compactness and efficiency over other types, and high power DPSSLs have replaced ion lasers and fla...

It’s a RGB fiber coupled laser. The output power is 10W. There are 5 buttons on the power supply, The last two are spare, only for 5IN1 laser. Three working mode CW/TTL/Analog can be choosed. Each laser can be controlled individually or turned on at the same time. If you need to customize multi-wave...

It is a 520nm dot laser module. It include a 1200mw laser, a voltage adjustable power supply, a module holder.  Green dot size is adjustable. The 520nm laser is pure green. The light is clear and bright and soft and not glare. Let's check it now.

It’s a 25W high power fiber coupled laser. The output power is adjustable by button. The wavelength is 976nm, it coupled a Multimode fiber with SMA905 interface. Suitable for use in medical research, fiber laser pumping and other production testing.

This is a 10-ring concentric circle laser module. The ring width can be adjusted to meet your different requirements. And the output also can be adjusted by adjusting the voltage. Let’s check it now.

It is the 488nm laser module include a 0~3V DC power supply. The output power is adjustable, and the laser spot size is adjustable.